How do I access the MIA server? New UT2004 installation on a new PC

[Right]

Is it working yet?

[xanath]

Is it working yet?

Well, I've followed the various tips. I've already copied all the UT2004 files from the PC that allow me to connect to the MIA server; but some unofficial servers don't appear in the game's Internet tab. I made this video to show what my tabs look like. And how, when I try to open the MIA server address, the game starts loading but stops. It could be that I need to connect closer to the modem, because it says the connection is lost. I played a little game to show you that the game works individually.

[xanath]

In this video, I demonstrate the problem. I had previously marked the MIA server address in my favorites.
https://youtu.be/X0TkFundYYA?si=tnJYf7I4KcxcxDR_

[Right]

In the news tab you should see the openspy news.
It is not shown in your recording,  UT is trying to reach the old server: 

In the game, open the console (~ key) and paste the following command and run it:
set IpDrv.MasterServerLink MasterServerList ((Address="utmaster.openspy.net",Port=28902))
and relaunch the game. This will update your game automatically.


https://ut2004serverlist.com/how-to-update-your-game/

This will be changed in the UT2004.ini

[IpDrv.MasterServerLink]
LANPort=11777
LANServerPort=10777
MasterServerList=(Address="utmaster.openspy.net",Port=28902)      <----- This is the new master server


Check:
You should see the servers in the internet tab
https://www.youtube.com/watch?v=n7tgHD1MzME

If not I think there is a rights issue. (you can not write in the unreal directory)

[Piglet]

I've found a reason for some of these connection issues. I've updated the server and https://miasma.rocks/downloads/3369_u_files.zip.

Hopefully this should clear up a lot of the conection problems.

[xanath]

In the news tab you should see the openspy news.
It is not shown in your recording,  UT is trying to reach the old server: 

In the game, open the console (~ key) and paste the following command and run it:
set IpDrv.MasterServerLink MasterServerList ((Address="utmaster.openspy.net",Port=28902))
and relaunch the game. This will update your game automatically.


https://ut2004serverlist.com/how-to-update-your-game/

This will be changed in the UT2004.ini

[IpDrv.MasterServerLink]
LANPort=11777
LANServerPort=10777
MasterServerList=(Address="utmaster.openspy.net",Port=28902)      <----- This is the new master server


Check:
You should see the servers in the internet tab
https://www.youtube.com/watch?v=n7tgHD1MzME

If not I think there is a rights issue. (you can not write in the unreal directory)

Thanks for the information. First, I added the ut2004.ini file with the commands indicated. This is what that file contains, and I only added the information you provided me:


[Core.System]
Suppress=DevLIPSinc

[Engine.GameEngine]
ServerPackages=OnslaughtBP
ServerPackages=AssaultBP

[Editor.EditorEngine]
EditPackages=OnslaughtBP

[Engine.LevelInfo]
MaxClientFrameRate=+90.0

This is what I added.

First version:
[IpDrv.MasterServerLink]
LANPort=11777
LANServerPort=10777
MasterServerList=(Address="ut2004master1.epicgames.com",Port=28902)
MasterServerList=(Address="utmaster.openspy.net",Port=28902)

the second version:

[IpDrv.MasterServerLink]
LANPort=11777
LANServerPort=10777
MasterServerList=(Address="utmaster.openspy.net",Port=28902)

It didn't work even though I clicked "update" in the program folder. The unofficial servers still don't appear.

[xanath]

I've found a reason for some of these connection issues. I've updated the server and https://miasma.rocks/downloads/3369_u_files.zip.

Hopefully this should clear up a lot of the conection problems.

Thanks for the info, Piglet. I downloaded the 3369_u_files file, opened it, and copied and pasted it into the ut2004 folder. I updated, but it didn't work. The program doesn't give me access to the unofficial servers. Otherwise, I'll continue playing on my old PC. I don't know if it's a problem with Windows 11. I have another PC with Windows 10 where I could install the game and try it out.

[Right]

Just to be sure:

If you go to Ut2004\system directory
Open UT2004.ini

Under [IpDrv.MasterServerLink] (There can only be 3 lines)
LANPort=11777
LANServerPort=10777
MasterServerList=(Address="utmaster.openspy.net",Port=28902)

Like I mentioned: In the news tab should be de openspy news


It might be useful if you join Discord:
https://discord.gg/Uu9XknSj

[Grim_Fandango]

Under [IpDrv.MasterServerLink] (There can only be 3 lines)

I have the above as well as:
MasterServerList=(Address="ut2004master.333networks.com",Port=28902)

Like I mentioned: In the news tab should be de openspy news

My news tab changes between the Openspy text and the following:

"Welcome to the 333networks UT2004 MasterServer! Please visit our discord for more information: http://333networks.com/discord
Happy Fragging!
-xoxo- Darkelarious
etc
etc
Build Author: Darkelarious <darkelarious@333networks.com>
Build time: May 24 2025 21:52:56

Not sure if there's any benefit to having the 2 x addresses, but I can't say I've noticed any issues with either.

[Piglet]

You can have as many as you like. It picks one at random to use:

MasterServerList=(Address="utmaster.openspy.net",Port=28902)
MasterServerList=(Address="ut2004master.333networks.com",Port=28902)
MasterServerList=(Address="ut2004master.errorist.eu",Port=28902)

Servers can choose to report to as many as they like (with the right serveractor)

[Right]

If you watch the recording you will see when he shows the news tab that is not openspy or 333